Imperial Single Banjo Bolts - Restricted - Stainless Steel
- £5.51
Product Overview
Description
Technical Details
Specifications
Design & Construction
- Type
- Restricted Single Banjo Bolt Designed for use with a single banjo fitting
- Head Type
- Hex Head Standard spanner installation
- Material
- 303/304 Stainless Steel Excellent strength and durability
- Finish
- Natural Stainless Steel Corrosion-resistant
- Manufactured In
- United Kingdom Precision CNC machined
Flow & Sealing
- Flow Design
- Restricted Limits fluid flow through the bolt
- Restriction Size
- 1.5mm Internal flow restriction
- Seal Type
- Crush Washers Two required for installation
Available Options
| Product Code | Thread | Restriction | Thread Length | Bolt Length Below Hex Head | Spanner Size |
|---|---|---|---|---|---|
| BLT-SGL-RES-SS-716X24-15 | 7/16"-24 | 1.5mm | 9mm | 18mm | 14mm |
Do not mistake this 7/16"-24 thread for the 7/16"-20 UNF thread. Check the required thread pitch carefully before ordering.
This banjo bolt has a 1.5mm internal flow restriction. Confirm that a restricted oil supply is required by the connected component before installation.
Common Applications
- Turbo Oil Feed Systems
- Oil Feed Systems
- Hydraulic Oil Systems
Compatible Accessories
Two suitable crush washers are required for installation, one on each side of the banjo fitting. Crush washers are not included as standard.
2-Year Warranty
- Free repair or replacement for two years from the date of purchase. Learn more
-
What is a restricted single banjo bolt?
A restricted single banjo bolt secures a single banjo fitting to a compatible threaded port while limiting fluid flow through a reduced internal passage.
-
What restriction does this banjo bolt have?
This banjo bolt has a 1.5mm internal flow restriction.
-
When should I use a restricted banjo bolt?
Use a restricted banjo bolt where the connected component requires a controlled oil supply rather than unrestricted flow. Confirm the required restriction for the specific component before installation.
-
What thread does the banjo bolt use?
The banjo bolt uses a 7/16"-24 thread. Check the thread specification of the component being connected before ordering.
-
Is 7/16"-24 the same as 7/16"-20 UNF?
No. 7/16"-24 and 7/16"-20 UNF have different thread pitches and are not interchangeable. Confirm the required thread carefully before installation.
-
Is this the same as an unrestricted banjo bolt?
No. This bolt incorporates a 1.5mm internal restriction and should not be substituted for an unrestricted banjo bolt unless restricted flow is required.
-
How many crush washers are required?
Two suitable crush washers are required, with one fitted on each side of the banjo fitting.
-
Are crush washers included?
No. Crush washers are not included as standard and must be added separately if required.
-
What material is the banjo bolt made from?
It is precision CNC machined from 303/304 stainless steel with a natural stainless steel finish.
-
Where is it manufactured?
It is precision CNC machined in the United Kingdom.
Hand-picked parts and components based on what you're viewing - perfect pairings to help you get the job done.
from£0.22
from£33.06
