Custom AN3 PTFE Hoses
Copy the code below to load your hose configuration at any time. You can also copy the direct link to share it, or scan the QR code for quick access.
If you modify a hose configuration, you'll need to generate a new code to save the latest version, as configurations aren't overwritten once created.
Enter your six character code to load your saved hose configuration.




Fixed fittings are rigid, whereas swivel fittings rotate independently of the hose, allowing for easier installation.
Banjo and swivel fittings are available in a range of angles, while fixed male and fixed female fittings are only available straight.
Banjo bolts and copper washers available separately.
Can be sealed with a washer.
Bulkhead nuts available separately.
Requires a M16 x 1.5mm nut available separately.
Fixed fittings are rigid, whereas swivel fittings rotate independently of the hose, allowing for easier installation.
Banjo and swivel fittings are available in a range of angles, while fixed male and fixed female fittings are only available straight.
Banjo bolts and copper washers available separately.
Can be sealed with a washer.
Bulkhead nuts available separately.
Requires a M16 x 1.5mm nut available separately.
All supports move freely on the line.
Suits a 13–15mm diameter hole. 22mm Length.
Suits a 16–18mm diameter hole.
Suits a 8mm bolt hole.
Suits 7mm bolt holes.
Keeps the hose firmly in place.
Lets the hose move slightly.
Suits a 13–15mm diameter hole. 22mm Length.
Suits a 16–18mm diameter hole.
Suits a 8mm bolt hole.
Suits 7mm bolt holes.
Keeps the hose firmly in place.
Lets the hose move slightly.
Suits a 13–15mm diameter hole. 22mm Length.
Suits a 16–18mm diameter hole.
Suits a 8mm bolt hole.
Suits 7mm bolt holes.
Keeps the hose firmly in place.
Lets the hose move slightly.
Use the vertical lines on the diagram to calculate the length. Measure from seat to seat, except for banjo fittings, which are measured from the center of the banjo eye.
Choose the colour of the protective wipe-clean PVC coating that's bonded to the stainless steel braided hose.
For a stealth look, we can cover the ends of the line with a black heatshrink.
If you think you may need to adjust the orientation of the fittings, select 'Not Shrunk' to avoid damaging the heatshrink when gripping the ends of the line. Once the fittings are aligned, you can shrink them on yourself.
Enter a label if you'd like this item packed individually and labelled.
- £33.06
Technical Details
Specifications
Hose Dimensions
- Size
- AN3 -3 AN · Dash 3
- Inner Diameter
- 3mm 1/8"
- Outer Diameter
- 8mm 5/16"
- Length Tolerance
- ±5mm Maximum finished hose length
Hose Construction
- Inner Material
- PTFE Excellent chemical and temperature resistance
- Outer Material
- Stainless Steel Braid Protected by a wipe-clean transparent or coloured PVC cover
- Bore Type
- Smooth Bore
- Conductive
- No Non-conductive PTFE liner
Fittings
- Material
- 303/304 Stainless Steel Excellent strength and durability
- Finish
- Natural Stainless Steel Corrosion-resistant
- Manufactured In
- United Kingdom Precision CNC machined
Pressure & Temperature
- Maximum Operating Pressure
- 4,200 PSI 290 bar
- Burst Pressure
- 12,600 PSI 869 bar
- Operating Temperature
- -70°C to 250°C -94°F to 482°F
Assembly
- Assembly Method
- Hydraulic Swage Creates a permanent, leak-free connection
- Quality Check
- Ready to Fit Every hose is individually inspected before dispatch
- Reusable Fittings
- No Designed to remain permanently assembled for long-term reliability
Additional Details
- Hose Weight
- 71g Per metre of hose
Common Applications
- Hydraulic Pressure Lines
- Pressure Gauge Lines
- Pressure Sensor Lines
- Turbo Wastegate Lines
Compatible Fluids & Gases
- Brake Fluid
- Clutch Fluid
- Hydraulic Oil
- Air
- Carbon Dioxide (CO₂)
- Nitrous Oxide (N₂O)
2-Year Warranty
- Free repair or replacement for two years from the date of purchase. Learn more
-
What size is your AN3 PTFE hose?
Our AN3 hose, also known as -3 AN or Dash 3, has a 3mm internal diameter and an 8mm outer diameter. It has a smooth-bore PTFE liner, stainless steel braid and a wipe-clean PVC cover.
-
Can I order an AN3 hose for a hydraulic pressure line?
Yes. We make AN3 PTFE hoses to length for hydraulic pressure lines that require a 3mm bore. Hydraulic oil is listed as compatible in the product specifications. Check the bore, fluid compatibility and operating limits against your system requirements before ordering.
-
Can I use an AN3 PTFE hose for a remote pressure gauge?
Yes. A made-to-length AN3 hose can connect a pressure take-off to a remotely mounted mechanical gauge. Check the thread and sealing type at the take-off and at the gauge before choosing your fittings.
-
Can I use an AN3 hose to remote-mount a pressure sensor?
Yes. An AN3 pressure sensor line connects the pressure take-off to a sensor mounted elsewhere. Choose the fitting at each end to match the take-off and the sensor or its adapter.
-
Can I order an AN3 hose for a turbo wastegate?
Yes. We make AN3 PTFE wastegate pressure lines to your specified length. Check the port fittings on your setup and measure along the planned route, allowing clearance from the exhaust and other hot components.
-
What is the maximum operating pressure of the AN3 PTFE hose?
The listed maximum operating pressure is 4,200 PSI (290 bar). Check the pressure and temperature specifications for your application before ordering.
-
How do I measure and order a custom AN3 hose?
Use flexible wire or string to follow the intended hose route. Use the measurement points shown in the builder diagram when entering your length, then choose the fitting for each end. The finished hose length tolerance is ±5mm and the minimum bend radius is 19mm.
-
Do AN3 PTFE hoses come assembled?
Yes. We permanently swage the stainless steel fittings onto the hose and inspect each assembly before dispatch. The hose comes with a two-year warranty.
-
Where can I order a made-to-measure brake or clutch hose?
Use our custom brake lines builder for a brake hose or our custom clutch lines builder for a hydraulic clutch hose.
Hand-picked parts and components based on what you're viewing - perfect pairings to help you get the job done.
only£0.87
only£1.09
only£3.30
only£11.04
only£1.93


















