Double AN Male to Banjo Adapters

Size

£13.63

In Stock

Free 100-day Returns

no questions asked

Free UK Delivery over £30

express options available

2-Year Warranty

free repair or replacement

Double AN Male to Banjo Adapters

These adapters provide two opposing AN4 male connections through a single 12mm banjo mounting point, allowing two compatible female AN/JIC fittings to connect at one component port.

Two AN4 Male Connections

The adapter has an AN4 male connection on each side of the central banjo eye. Both use a JIC 37° male cone flare and seal against the corresponding female cone flare in a compatible AN/JIC fitting.

12mm Banjo Connection

The central 12mm banjo bore is designed for use with a compatible M12 banjo bolt. Suitable sealing washers are required on both sides of the banjo connection.

Compact Double Connection

The opposing AN connections allow two fluid lines to share a single banjo mounting point while keeping the connection compact at the component.

6061-T6 Aluminium Construction

The adapter is manufactured from 6061-T6 aluminium with a black anodised finish.

Frequently Asked Questions

How many AN connections does the adapter have?
The adapter has two opposing AN4 male connections, one on each side of the central banjo eye.
How do the AN4 connections seal?
Each male AN/JIC connection uses a JIC 37° cone flare and seals against the mating female cone flare in a compatible fitting.
What size is the banjo connection?
The adapter has a 12mm central banjo bore for use with a compatible M12 banjo bolt.
Are the banjo bolt and sealing washers included?
The adapter is supplied separately. Compatible banjo bolts and sealing washers can be selected as optional additions.
Are sealing washers required?
Yes. Suitable sealing washers are required on both sides of the banjo connection.
Do the AN threads require PTFE tape or thread sealant?
No. The AN/JIC connections seal on their mating 37° cone flares rather than on the threads.

Adapter Type: Double AN Male to Banjo Adapter Two opposing AN connections with a central banjo mounting point
Material: 6061-T6 Aluminium Lightweight, high-strength alloy
Finish: Black Anodised Protects against wear and corrosion

Banjo Eye: 12mm For use with a compatible M12 banjo bolt
Banjo Sealing Method: Sealing Washers Required on both sides of the banjo eye
AN Connections: 2 x Male AN4 connections
Flare Types: JIC 37° Male cone flares

Installation: The AN connections seal on the 37° flare and do not require thread sealant. Use suitable sealing washers on both sides of the banjo connection and a compatible M12 banjo bolt.